1988 Hunter 35 Legend For Sale

$44,500
$35,000
Stock #140563 -
Available
Available
$35,000
$44,500

Have Questions?

9
Booat Out Of The Water
Booat Out Of The Water
Booat Out Of The Water
Galley
Booat Out Of The Water
Galley

Boat Details

Year:
1988
Type:
Sail
Brand:
Hunter
Category:
Cruiser/Cruiser Sailboat
Model:
35 Legend
Length (LOA):
35'
Beam:
10' 8"
Draft:
54"
Trailer:
No
Stock #:
140563
Location:
Indiantown, Florida
(near Port St. Lucie)
Status:
Available
Reason for Selling:
Moved out of the country
Sailboat Details
Halyard Winches:
Rigged For Single Handed:
Genoa:
Main Sail:
Roller Furling Jib:
Sheet Winches:
Sloop Rig:
Backstay:
Boom Vang:
Traveler:
Boom:
Chain Plates:
Furler:
Mast:
Rigging Hardware:
"Hunter Legend 35- Meticulously Upgraded And Updated Over Several Years! All Maintenance Recently Performed! New 16K BTU A/C,Headliner,Flooring!"

New air conditioning in 2017 16,000 btu model FCF.

Custom made V-berth mattress (4 inches of memory foam and 4.5 inches of High-density foam

Removed carpet throughout and painted with water/mold proof primer (3 coats) and SC#1000 high build Sound Deadening and decreasing paint resultin...more

9
Booat Out Of The Water
Booat Out Of The Water
Booat Out Of The Water
Galley
Booat Out Of The Water
Galley

1988 Hunter 35 Legend Cruiser Sailboat in Indiantown, Florida

Stock #140563

New air conditioning in 2017 16,000 btu model FCF.

Custom made V-berth mattress (4 inches of memory foam and 4.5 inches of High-density foam

Removed carpet throughout and painted with water/mold proof primer (3 coats) and SC#1000 high build Sound Deadening and decreasing paint resulting in a well-insulated cabin.

Expanded both the fore and aft entryways to the berths (creates a more open feel for the vessel)

Replaced the headliner and walls of the cabin with polycarbonate sheets with marine grade waterproof canvas which can easily be removed.

A 250 watt solar panel was added to keep the batteries charged via the sun

New Propellor Shaft, Shaft Box, Stuffing Box, Coupler. Re-finished Prop and Shaft Srut. We noticed vibration from the shaft on our way to put her in storage. After removal and inspection by Blair Propellor in Stuart, we were advised to replace shaft/shaft box and coupler, have alignment completed. This is critical to the longevity of the shaft, mounts, etc. It turned out that when we purchased her she was not aligned correctly. We did not have any issues with operation when we owned it, but correct alignment would have made replacement unnecessary.
Replaced flexible Engine mounts. Engine mounts had failed due to mis-alignment.
Replaced Raw water pump.
Complete replacement of Salon Portlights as they had been cracked due to excessive tightening.
Removed the black/cracked original vinyl and painted in Navy Blue Topside paint. It was difficult to get a good picture of it, but it looks much better.
Replaced gaskets at fresh water pump(removed for cleaning and painting.
Replaced gasket at initial fuel priming pump.
Replaced Mixing elbow with Stainless Steel elbow. These tend to get corroded, so this is one less thing to think about.
Rebuilt Starboard Head wall. There was rotted wood caused from a leak at the companion way.
Sealed Leaky Companionway hatch.
When rebuilding the Head wall, included an access panel to more easily check the oil, and have access to fuel intakes.
Replaced all the engine room insulation with 1" thick sailor solutions sound board. We have not had a chance to run her, but the reviews are very good on its insulation qualities.
Applied a layer of cork to Companionway entry(I do not have photos, but similar to Galley)
Made companionway step a liftable hatch. Makes it so much better for toping off oil or working on the topside of the engine
Removed Rust and corrosion caused from the leaky companion way, neutralized rust and Painted engine with high heat ceramic paint(2 coats of primer 3 top-coats. Note: the only pictures I have is when companion way step was not in.
Replaced headliner in V-berth.
Painted throughout with Rustoleum Almond(3 coats) to lighten the Salon and Cabins.
Painted Engine room floor with Topside White(3 coats). Makes it easier to see if there are any leaks.
Removed Teak/Sanded with 80/100/150/220/500 and applied Spar Varnish (6coats)

What is needed.
If you plan on leaving her in the water year round, you may want anti fouling bottomside paint.
Running Rigging is tired, but has life. If you are just coastal sailing you could put it off, but if you are Island Hoping you may want to replace.
The electronics included(Auto-Pilot, Wind, Speed, and depth meter) all work. There are some hairline cracks in the display, but not through the entire display(so water does not get in). But, if that is an issue for you, you may want to replace.
Sails: The Genoa Jib is in excellent condition stored in AC storage when not in use and very low NM. The main sail is a bit tired, but will not need replacement.
We removed the shower from the head as we were living dockside. We do have the original faucet and shower if you want to put it back in.
The batteries(1 starter and 2 house) are holding charge, but I would replace them as they have been sitting and were purchased in 2017 from Costco.
The original 12v Refrigerator compressor was removed, but the insulated storage was left in. We used a 12v cooler in the Aft cabin and it worked well for us. If you want, you can drop in a new 12v compressor/refrigeration unit where the old one was and hook it up to the Insulated storage.
The Aft cabin does not have mattress Cushions. We got a quote for $300 to have them done and have the measurements, but did not have time to complete. The V-berth cushions are 8" of Memory Foam and is seriously comfortable! We did it that way since we lived on her.

Who is this boat good for?
We boat her to live on dockside as we wanted to learn to sail and the freedom to move around. Thats why we installed a Marine AC;) We are still novices so all I can say is what I read, that she is not a blue water boat, but perfect for coastal family cruising or Island Hoping through the Carribean. She has been to the Bahamas a number of times(not with us, as we only coastal sailed). She was rigged by the original owners as a local Regatta racer. Not really knowing much about that, all I can say is we had cruising at 8-9 Knots and she really felt great! We can take her where to Puerto Rico where we moved, but we just do not have the time as we have a new baby Girl!

Information On Condition

This Hunter 35 Legend is in good condition and is currently on the hard. The interior has been modified to make living-board more comfortable.

The Main Sail and the Genoa sale are in good solid condition and are currently being stored in an air conditioned storage facility.

The old bilge pump was replaced with a new 2,000 gph pump.

Heat exchanger removed and cleaned. Oil changes have been done per Yanmar specifications All filters were recently replaced.

Approximate boat location: Indiantown, Florida

View Bio
(609) 517-7018
Send Text
ONLINE NOW!
I'm up late if you want to talk!I'm Up Late
Have a Question?
This boat is on people's minds. It's been viewed times in the past week.
Sea Tow memberships for free with boat purchase

60-day Sea Tow membership* comes standard with your boat purchase!

Shop With Confidence!
Our company has the proud distinction of being on the Inc. 5000 Fastest Growing Companies list.
Basic Details
Year:
1988
Type:
Sail
Brand:
Hunter
Category:
Cruiser/Cruiser Sailboat
Model:
35 Legend
Length (LOA):
35'
Hours:
2,200
(as of 5/17/2018)
(Cruising)
Stock #:
140563
Location:
Indiantown, Florida
Engine & MechanicalMech.
Count:
1
Year:
1988
Brand:
Yanmar
Model:
8GM30F
Hours:
2,200
(as of 5/17/2018)
(Cruising)
Size:
27 hp
Fuel Type:
Diesel
Fuel Tank:
64 gals
Propeller:
Bronze
Drive Type:
Direct Drive
Config.:
Inboard
Bilge Blower:
Bulk Heads:
Cutlass Bearing:
Fuel Filters:
Heat Exchanger:
Recently Cleaned
Engine Alarms:
Oil Pressure And Temperature
Bilge Pump:
Johnson 2200 Gph
Ballast:
4600 Lbs
Holding Tanks:
25 Gallon
Dimensions & Specifications & Specs
Length Overall:
35'
Length at Water:
29' 8"
Beam:
10' 8"
Max. Draft:
54"
Cockpit Location:
Aft
Weight:
12,100 lbs
Bridge Clearance:
60'
NavigationalNav. Equipment
Autopilot:
Depth Instrument In Dash:
Display Covers:
Wind Instrument:
Windex:
GPS / Plotter:
Masthead Light::
Navigation Lights:
Running Lights:
Stanchions:
VHF Antenna:
Deck Features
Access Door:
Anchor:
Anchor Rode:
Compartment Storage:
Spreader Lights:
Non-skid Deck:
Thru-bolted SS Cleats:
Swim Ladder:
Transom - Walk Through:
Anchor Locker:
BBQ Grill:
Bench Seat:
Cleats:
Cushions:
Deck Hardware:
Genoa W/pole:
Hatch Covers:
Ladder:
Manual Boom:
Mooring Lines:
Rod Holders:
Rub Rails:
Steering Wheel:
Storage:
Transom Fold Away Bench:
Transom Seating:
Vents:
Winches:
Windlass:
Windlass Locker:
Safety EquipmentEquip.
CO/2 Detector:
Dock Lines:
Distress Flag:
Dive Flag:
Emergency Tiller:
Flare Kit:
Flares:
Life Jackets:
Life Sling:
Marine Whistle:
Owners Manual:
Signal Mirror:
Sump Pump:
ElectricalElec. Components
Speakers:
Storage Batteries:
Tach:
Transducer:
Transom Storage Box:
110v AC Outlets:
12 V DC Outlets:
AC Electric Panel:
Alternator:
Battery Charger:
Battery Switch:
Circuit Breaker:
Courtesy Lights:
Horn:
Interior Lighting:
Inverter:
Lighting:
Location Of The Battery:
Shore Power:
Shore Power Cord:
Solar Panel:
Regony
Types Of Gauges:
Analog
Water Heater:
6 Gal, 110 And Engine
Electrical Service:
30A
Sails
Halyard Winches:
Rigged For Single Handed:
Genoa:
Main Sail:
Roller Furling Jib:
Sheet Winches:
Rigging
Sloop Rig:
Backstay:
Boom Vang:
Traveler:
Boom:
Chain Plates:
Furler:
Mast:
Rigging Hardware:
Accommodations & Passengers
Pass. Capacity:
10
# Cabins:
2
Sleep. Capacity:
6
# Berths:
2
Water Capacity:
64 gals
Blinds:
Cabin:
Cabin Door:
Cabin Fan:
Cabin Lighting:
Cabinets:
Coffee Maker:
Countertops:
Curtains:
Flooring:
Handbasin:
Hanging Locker:
Head:
Nav Station:
Port Holes:
Pressurized Water System:
Salon:
Sky Light:
Sofa:
Table:
Toilet Manual Flush:
V Berth:
Ice Box:
Dinette:
Exhaust Fans:
Hot Plate:
Tramontina Induction Hot Plate
Microwave:
700 Watt
Headroom:
7'
A/C + Heat:
1600 BTU
ConstructionConst. Features
Hull Material:
Fiberglass
Exterior Color:
White
Interior Color:
Tan/blue
Bottom Paint:
Bow Scuff Plate:
Closed Transom:
Helm Console:
Keel Type:
Winged
Ask a Question
Submit an Offer  
Priced At:
$35,000
My Offer:

  All reasonable offers will be reviewed and presented to the seller.

  All offers are contingent upon being fully satisfied with unit after personal inspection and/or professional inspection.

This form is only for starting a conversation. Submitting this form DOES NOT actually obligate you to proceed with submitting a written offer.

We work closely with several marine lenders to offer you competitive rates and flexible financing options to get you approved and on the water quickly. Click the button below to view some of the lenders we work with.

Financing may not be available for this vessel, due either to its age or category. However, banks are giving marine loans, and we would love to get you started in a discussion about financing.

Zack Hamric
Offshore Financial
Offering the most competitive loans for boats from runabouts to megayachts
(941) 961-9477
JR Bates
Intercoastal Finance
Working with quality lenders to offer you the most competitive rates and options
(772) 559-1562
Tom Bell
Excel Credit, Inc.
Boat Loans

**We Finance Fun**

Have Some!!!
(407) 712-2806
Vernon Blanc
Newcoast Financial
From sport boats to cruisers to megayachts, we design finance programs to meet your needs
(727) 324-1362

Similar Boats to the Hunter 35 Legend For Sale

More Near Indiantown, Florida

Sold Comps

Call John at (609) 517-7018
Send Text

A Note About Accessibility

This site is under review to determine what aspects of our site do not perform to standards set by the WCAG 2.0 Level AA for web site accessibility. We are working diligently to bring our site up to this accessibility standard. If you are unable to access any features or content during this review, please contact POP Yachts at wcag@popsells.com. Your feedback will assist our company in providing the desired information to you via a different method. If you like, you can also provide feedback by clicking the button below and letting us know how we can help.