Are you a fan of Ted Brewer and low maintenance blue water cruisers? Then you should take a close look at this Brewer "Bulldog" design built of all-aluminum construction.
She is a custom-built cutter-rigged sailboat built for offshore cruising built-in 1989. She has radius chine construct...more
We're sorry to see this one go but happy to say that she has been sold.
Are you a fan of Ted Brewer and low maintenance blue water cruisers? Then you should take a close look at this Brewer "Bulldog" design built of all-aluminum construction.
She is a custom-built cutter-rigged sailboat built for offshore cruising built-in 1989. She has radius chine construction, moderate draft, and a long waterline with a cutaway forefoot and high freeboard and a transom/keel hung rudder with a wind vane which distinguish her as a one of a kind, in the current market.
This boat has a traditional layout that will comfortably sleep 5. She is tricked out with the latest high tech gear and is ready for you to take off and sail around the world. Being of all-aluminum construction, you will be able to sail for years with little maintenance and NO VARNISHING!!
Many of her features are listed below:
-Ballast 5000 poured lead
-Displacement 12,000 lbs
-Sail Area 528 sq.ft.
-Construction Aluminum
-Displacement/Length Ratio of 305
-Sail Area/Displacement Ratio 16:1
-75 gallons freshwater in three keel tanks
-58 gallons diesel fuel in two aft tanks
Internal tanks
-Racor twin 500MA 30-micron primary fuel filters with vacuum gauge
Sails and rigging
-Jib and staysail on Shaefer roller furling
-Identical jib and staysail spare sails
-H&H asymmetrical spinnaker
-Twin sets ST Harken cockpit winches
-Running backstays on titanium blocks
-Mainsail in good condition with twin reef points
-Mast Harken ST winch and clutches
-Two boom reefing winches
-Bridge deck Harken winch and clutches
-Jiffy reefing and lazy jacks
-Rigid adjustable boom vang
-Twin spinnaker/whisker poles w/mast mounting track
Ground tackle
-Electric/manual Simpson windlass
-120' chain 5/16"
-190' rode 3/4"
-Twin SS anchor rollers
-Spade S-80 (new) and S-100 anchors
-Aft Fortress FX-37 aluminum anchor on 75' rode
-Two cockpit lazarettes with fenders, shore tackle
-Twin 10 gal propane bottles in safety locker with overboard vent
Electronics
-Garmin GPSMAP 840xs with sonar transducer and blue charts (2015)
-Garmin GPSMAP 741xs repeater at chart table
-ICOM M-506 marine VHF radio with dedicated antenna (2015)
-ICOM MA-500TR AIS transponder with dedicated antenna (2015)
-ICOM ICOM IC-M710 MF/HF Marine Transceiver
-ICOM AT-130 Antenna (not installed)
-Standard Horizon HX870 VHF handheld (2015)
-Raymarine ST-4000 tiller autopilot with SPX-5 Course Computer
-Xantrex Freedom 458 2500W 12VDC modified sine wave charger/inverter
-Lifeline AGM GPL-27T 845 CCA each of four house batteries (2012)
-Lifeline AGM GPL-24T 800 CCA dedicated starter battery (2012)
-Yanmar 55 amp alternator
-Vitron Blue Energy MPPT charge controller and gauge
-Radar arch
-Garmin GMR HD 18" radome (2016)
-Garmin GXM 53 Sirius XM weather antenna (2015)
-85 watt Solar/KISS wind generator with a smart controller
-Engine hoist and stowage
-Fishing pole attachment
-Propane grill
Galley
-Force 10 three-burner stove and oven
-IsoTemp hot water heater with a valve to engine heating
-Dometic CU Adler Barbour Fridge/freezer with water cooler
-Dometic DTU 10K marine air/heater with SMX controller
-Ample stores lockers beneath port and starboard berths
-10 opening/latching drawer near galley and chart table
-8 opening lockers for cookware, bulk storage, and dive gear
Safety
-Collision bulkhead forward at the waterline
-Rule-Mate 1100-A automatic electric bilge pump (1100 GPH) (2017)
-Jabsco 36600 electric bilge pump (475 GH) (new diaphragms)
-Rule switched 3800 GPH 17A (D) electric bilge pump
-Whale Gusher 30 manual bilge pump (1860 GPH) (new diaphragms)
-Through-hole bungs
-MOB pole, Lifesling rescue system, life ring, PFD
-Lifelines, bow pulpit, Bimini, and dodger handholds
-Mast steps and mast pulpit
-Aluminum slotted toe rail with scuppers
-Full-length polycarbonate rub rail
-KiwiGrip non-skid deck paint throughout
-Custom welded swim step/rudder guard with dive ladder
-Rechargeable 2900 lumen LED spotlight
-Deck and cockpit lighting
-Fully equipped USCG approved navigation/anchor lighting
-Teak drainable cockpit seating
-Teak companionway ladder
-Teak cabin sole
-Full-length cabin handrails and grab bars
-Stove railing and adjustable potholders
-Two vices mounted on centerline workbench
-Fire extinguishers
Steering
-Tiller with replacement
-Raymarine ST-4000 with programmable computer course controller
-Monitor wind vane with various sized vane blade
-Vane attachment to mount Raymarine auto-tiller
-Full cabin width mainsail boom traveler
Navigation
-Full-sized chart table with full-sized storage below
-Plastimo Contest 101Tactical Compass bridge deck
-Plastimo Contest 101 Tactical Compass cabin bulkhead
-Barometer/chronometer x two; barometer stands alone
-Aqua Signal Navigation Tricolor Anchor Pedestal Mount Navigation Light
-Bicolor pulpit mounted navigation light with a stern light
Accommodation
-V-berth forward with storage under and forward
-Quarter berth to port, settee berth and a pilot berth to starboard
-AirHead composting toilet
-Hanging clothing bar and locker
Dinghy
-Professionally designed/built custom nesting dinghy with chocks
-11' extended 7' nesting length with floatation fore and aft
-Twin oarlocks, twin oars: Shaw & Tenney handmade 7.5' spoon blades
-Sail and easily stepped mast with leeboard and rudder
-Suzuki 2.2hp lightweight 2 stroke gas outboard with manual and parts
Miscellaneous
-Bottom paint and zincs December 2017
Dual stereo/CD with Bose speakers
Dinghy included: Highfield Rib UL 290
According to the seller, this boat is in great shape and ready to cruise the world.
We encourage all inquiries and questions relating to its present condition, the accuracy of details including but not limited to its location, engine hours, service history, listing status and features.
We have several active listings for Beneteau, Irwin Yachts, Hunter, and Morgan. If you're in the Hialeah, Fort Lauderdale, Pembroke Pines, or Hollywood areas, please use the form on this page to let me know what you're looking for and I'll get back with you today about any other cutter sailboat / cruiser options we have locally that may meet your needs.
Check out this 1988 Brewer Bulldog in Miami, Florida! #popyachts https://www.popyachts.com/cutter-sailboats-for-sale/brewer-bulldog-in-miami-florida-195308
Click to tweet this message
When prompted, enter stock number:
In order to see the advanced metrics, all 44 photos, download a brochure, and more, please quickly create an account. It just takes a second and you will have unlimited access to view information for this listing and ALL others on the website. If you don't use social media, click here to register with your email.