1986 Liberty 28 For Sale

$22,500
Stock #132771 -
Available
Available
$22,500

Have Questions?

1986 Liberty 28 - #1
1986 Liberty 28 - #1
1986 Liberty 28 - #1
1986 Liberty 28 - #3
1986 Liberty 28 - #1
1986 Liberty 28 - #2

Boat Details

Year:
1986
Type:
Sail
Brand:
Liberty
Category:
Cutter/Cutter Sailboat
Model:
28
Length (LOA):
28'
Beam:
8'
Draft:
48"
Trailer:
No
Stock #:
132771
Location:
Melbourne, Florida
Status:
Available
Air Conditioning:
Yes
Sailboat Details
Main Sail:
"Some Like it Hot and this Liberty 28' double ender will satisfy alot of your needs. Engine; 30hp Perkins reconditioned, 30 Gallons Diesel Fuel."

Some like it Hot and it doesn't get hotter than Norma Jean.

This Sailboat is perfect for enjoying a relaxing time with your friends or family or riding like the wind. With a 4ft full keel to go Island hopping.

A reconditioned 28hp Perkins Motor completely rebuilt lets you cruise silen...more

1986 Liberty 28 - #1
1986 Liberty 28 - #1
1986 Liberty 28 - #1
1986 Liberty 28 - #3
1986 Liberty 28 - #1
1986 Liberty 28 - #2

1986 Liberty 28 Cutter Sailboat in Melbourne, Florida

Stock #132771

Although located in Canada, due to Canadian regulations, this boat is not available for sale to potential buyers in Canada.

Some like it Hot and it doesn't get hotter than Norma Jean.

This Sailboat is perfect for enjoying a relaxing time with your friends or family or riding like the wind. With a 4ft full keel to go Island hopping.

A reconditioned 28hp Perkins Motor completely rebuilt lets you cruise silently when you're not sailing. One 30 amp 125 volt shore power inlet

DC POWER: 12 volt

- Two 6 volt CG2 flooded cell house batteries
- One GRP 24 flooded cell engine starting battery

This is a one of a kind custom built out of West Palm Beach to the individual request of the customer.

In this particular case the original owner wanted more space for storage so this Liberty does not have a V-berth.

You have the latest navigation equipment and comes with a wireless remote.

Set your boat on Auto Pilot with the Raymarine smartpilot X-5 WITH S-100 REMOTE.
BN-202 Ritchie Compass.
Garmin 492 GPS.
Radar Reflector

This Cutter has all of the latest in communication.

Standard Horizon Matrix AIS + Gx 2150 VHF radio.
GX2000 receiver and radio
ACR 406 MHZ personal locator
Uniden QT206 Depth finder.
A Uniden handheld floating radio

For your long stays in the Cabin, there is a Mermaid 9000BTU Air conditioner and a 10,000 BTU Heater.

The boat has been US Coast Guard Inspected.

The Cabin is decked out with: One head with 8 " x 11" stainless steel sink, and vanity mirror located forward.

CABIN BRIGHT WORK: The interior teak surfaces are a rubbed finish and in good condition.

STORAGE: The cabinets, lockers, drawers, bin lockers and shelving are in good condition.

HEADLINERS: Headliner in salon and head are in good condition.

LIGHT FIXTURES: Wall mounted port and starboard 12 volt lighting is functional.

CABIN SOLE: Teak and holly sole in salon is in good condition.

VENTILATION: Adequate with 1 forward opening hatch , 6 opening portlights, and companionway hatch. Fair condition. The port lights are all bronze. The opening hatch has a solar fan.

GALLEY

Galley is starboard immediately upon entrance from companionway.

SINKS: One 10" x 14" x 10"stainless steel sink is located in the galley with a foot operated manual pump. Faucet and countertops in good condition.

REFRIGERATION: Ice box aft starboard cabin - good condition.

STOVE: Bright Spark Princess butane single burner stove
The deck construction has a solid foundation:
Wet Dry Vacuum.

STANCHIONS: 1" stainless steel stanchions run perimeter of vessel.
Several stanchion bases had motion when percussion tested where lag bolted into the teak toerail.

PULPIT: 1" stainless steel stanchions and rail system.

PUSHPIT: 1" stainless steel stanchions and rail system with catbird seat..

TOE RAILS: Teak with bronze rubrail.

CLEATS:

- Two 10" bronze cleats forward with bronze chocks.
- One 12" bronze cleat aft with two bronze chocks.
- Two 6" bronze sheet cleats port and starboard on cabin top.
- All through bolted. No motion detected during percussion test - serviceable.

HATCHES:

- One sliding companionway hatch with removable companionway boards.
- One opening hatch forward above head. Port hinge worn

HANDRAILS: 7' teak handrails run fore and aft both port and starboard on aft cabin top. 2' teak handrails run fore and aft both port and starboard on forward cabin top.

The sails and masts are constructed with SAILS/RIGGING SPARS

MAST: Kenyon BF006276 mast.

BOOM: Kenyon boom also painted white. Gooseneck fitting. Bails and cunningham rings secure and serviceable.

RIGGING

This is a standard cutter-type rig with forestay and staysail stay.

Rigging wire is 1x19 stainless steel with bronze turnbuckles.

Forestay and staysail both have roller furlings. Forestay has a Harken "Cruising 1" furler system. Staysail furler is a Profurl system.

Chainplates are external and visible. condition with no movement detected when percussion tested.

SAILS

Sails were not inventoried or inspected. Staysail sail was furled at time of inspection. Forestay sail was not installed. The mainsail was secured on boom.

HARDWARE

WINCHES: Two-speed self-tailing Lewmar 30 winches are located port and starboard on forward cockpit coaming.

Two speed Lewmar 16 winches are located in forward cockpit on cabin top. Two Lewmar 8 winches are located on port side of mast and one Lewmar 8 winch is located on starboard side of mast.

There are a few extras like a rechargeable handheld spotlight, spare parts and some tools common to the boat.

This Cutter is ready to go with a new 6-foot Dinghy and Owner has a new Grill Just put in.

Also Has a Dodger and Bimini Top that is off the boat now but would be willing to include upon request.

Dinghy included: New 6 foot Dinghy

Information On Condition

It's in good condition; Just needs a little TLC. The owner is willing to be flexible if someone is willing to put in the time to get in peak condition externally.

Recent Rebuild.

New work was done to the engine last year. It runs like a top.

Engine had been gone over recently.

Approximate boat location: Melbourne, Florida

View Bio
(763) 657-6222
Send Text
michael mcgannon
ONLINE NOW!
I'm up late if you want to talk!I'm Up Late
Have a Question?
Sea Tow memberships for free with boat purchase

60-day Sea Tow membership* comes standard with your boat purchase!

Shop With Confidence!
Our company has the proud distinction of being on the Inc. 5000 Fastest Growing Companies list.
Connect to POP for Photos

In order to see all 58 photos and more, please quickly create an account. It just takes a second and you will have unlimited access to view information for this listing and ALL others on the website.

Basic Details
Year:
1986
Type:
Sail
Brand:
Liberty
Category:
Cutter/Cutter Sailboat
Model:
28
Length (LOA):
28'
Hours:
--
Stock #:
132771
Location:
Melbourne, Florida
Engine & MechanicalMech.
Count:
1
Year:
1988
Brand:
Perkins
Model:
103-09
Size:
28 hp
Fuel Type:
Diesel
Fuel Tank:
30 gals
Drive Type:
Direct Drive
Config.:
Inboard
Keel:
Rudder:
Dimensions & Specifications & Specs
Length Overall:
28'
Beam:
8'
Draft:
48"
Water Capacity:
56 gals
Bridge Clearance:
33'
Waste Capacity:
15 gals
NavigationalNav. Equipment
DVD Player:
Autopilot:
Speed/depth/gps:
Speedometer:
VHF:
Standard Horizon Matrix AIS+
Compass:
Ritchie
GPS / Plotter:
Garmin Gpsmap 492
Deck Features
Winches:
Anchor:
Anchor Chain:
Deck Rail:
Dinghy:
Anchor Locker:
Safety EquipmentEquip.
Life Jackets:
ElectricalElec. Components
110v AC Outlets:
CD Player:
Circuit Breaker Panel:
Deck Lighting:
Stereo:
Shore Power (110v. AC):
Sails
Main Sail:
Accommodations & Passengers
Pass. Capacity:
6
# Cabins:
1
Sleep. Capacity:
4
# Berths:
3
Generator:
No
Air Conditioning:
Yes
(9000)
A/C + Heat:
Cabin:
Cabin Fan:
Cabinets:
Dinette:
Head:
Ice Box:
Refrigerator:
Shower:
Sink:
Sky Light:
Stove:
Central Vacuum:
ConstructionConst. Features
Hull Material:
Composite
Ask a Question
Submit an Offer  
Priced At:
$22,500
My Offer:

  All reasonable offers will be reviewed and presented to the seller.

  All offers are contingent upon being fully satisfied with unit after personal inspection and/or professional inspection.

This form is only for starting a conversation. Submitting this form DOES NOT actually obligate you to proceed with submitting a written offer.

We work closely with several marine lenders to offer you competitive rates and flexible financing options to get you approved and on the water quickly. Click the button below to view some of the lenders we work with.

Financing may not be available for this vessel, due either to its age or category. However, banks are giving marine loans, and we would love to get you started in a discussion about financing.

Zack Hamric
Offshore Financial
Offering the most competitive loans for boats from runabouts to megayachts
(941) 961-9477
JR Bates
Intercoastal Finance
Working with quality lenders to offer you the most competitive rates and options
(772) 559-1562
Tom Bell
Excel Credit, Inc.
Boat Loans

**We Finance Fun**

Have Some!!!
(407) 712-2806
Vernon Blanc
Newcoast Financial
From sport boats to cruisers to megayachts, we design finance programs to meet your needs
(727) 324-1362

More Near Melbourne, Florida

Call us at (941) 257-0111