Pacific Seacraft Dana 24 Sail Plan Penned by the late great Bill Crealock and introduced by Pacific Seacraft in 1984, the Dana, at only 24 feet on deck, is perhaps the consummate pocket cruiser. The boat combines traditional styling with the kind of keen craftsmanship and solid const...more
We're sorry to see this one go but happy to say that she has been sold.
Pacific Seacraft Dana 24 Sail Plan Penned by the late great Bill Crealock and introduced by Pacific Seacraft in 1984, the Dana, at only 24 feet on deck, is perhaps the consummate pocket cruiser. The boat combines traditional styling with the kind of keen craftsmanship and solid construction upon which Pacific Seacraft built its reputation.
Like all good boats, the Dana 24 is well balanced, fast for her size and sea kindly. Her shallow draft allows for exploration in cruising grounds larger yachts cannot, and her design, now over 25 years old, is well proven with a number of ocean crossings to her credit. Yet for all her offshore capabilities she is one of a select few that can go home on a trailer.
Although the Dana 24 has never been a cheap boat to buy, owners can console themselves with the lower maintenance bills from a blue water cruiser of diminutive size.
Perhaps Crealock best sums it up, "It's a wonderful entry level, genuine go anywhere cruising boat".
It could be said that the Pacific Seacraft of yesteryear had an affinity for pocket cruisers. Right from the get-go, the company introduced the Pacific Seacraft 25 and later the Orion 27, both strong and capable offshore cruisers designed by one of the co-founders himself, Henry Morschladt. However, it's the Flicka 20 that we remember most when we think of small and capable. Pacific Seacraft acquired the Flicka 20 around 1977 and became a hit for the company. By the early-1980s the company was looking to augment Flicka with a larger boat of similar style.
It was Bill Crealock, well respected for his seaworthy designs, who got the commission for the new boat and by 1984 the Dana 24 was introduced. She was fairly well received, in fact, a respectable 222 boats were sold in the subsequent fifteen years before a booming mid-1990s economy shifted interest to bigger boats.
"The taste went to bigger boats for a while and smaller boats just got put aside... The size of boats people get seems to vary with the square root of the Dow Jones average" - Bill Crealock
Pacific Seacraft ceased production of the Dana 24 in 1997, but after a three-year hiatus interest was reignited as the economy slowed. The company recommended limited production in 2000 however only a few were sold.
In 2007, Pacific Seacraft entered receivership before changing hands to its new owner, Stephen Brodie. Interestingly, the Dana 24 molds were not part of Brodie's acquisition. Instead, the molds passed to a dealership in Seattle called Seacraft Yachts who have made the boat available once again (starting with hull number #351).
In total at least 250 boats have been built. In this time there's been little to improve upon the little Dana 24, the boat remains almost unchanged, a true testament to the quality of Crealock's original design.
Configuration and Layout
Dana 24 Interior Layout The Dana 24 is a moderate displacement cruiser, below the waterline, you'll find a full keel with a forefoot cutaway and a keel-hung rudder. Her sheer line is elegant and she has a memorable plumb bow with a teak bowsprit platform. Compromise on her size means that she is lacking the distinctive Crealock double-ended stern in favor of a wide and almost vertical transom.
The boat retains the signature cutter rig, that's so popular among the blue water fraternity. Some have optionally been set up for single handing with sheeting and halyard lines led back into the safety of the cockpit.
The cockpit provides good protection from the elements and there are two generously sized cockpit drains. The two cockpit seats are long enough to sleep on at 6′ 3″ in length, and have large lockers are below. There's a watertight hatch on the cockpit sole to provide access to the engine.
Down below you'll find of 6′ 1″ of headroom and it's apparent that 8′ 7″ of beam has been plenty for Crealock to play with. The interior layout demonstrates excellent functionality and clever use of space. Her interior space is around 50% larger than other boats of similar length, making her feel like a much bigger boat.
She has an open plan interior with hand rubbed oiled teak cabinetry and a teak-and-holly sole that gives her a beautifully warm and inviting feel. As you descend the companionway, on the port side is a full galley with a gimballed two-burner propane stove, a large insulated icebox and a 10-inch-deep sink with hand-pump. A flip-down cover over the stove provides extra counter space to work with, as does another in the seating area. To starboard there is an enclosed head are with head, integral shower pan, hanging locker and sink with hand pump.
The four available berths are generous and comfortable a V-berth berth that is 6′ 8″ long and 6′ 9″ wide, as well as two 6′ 6″ settees with cleverly placed foot room that tucks beneath the v-berth.
Beneath the forward berth are two large drawers and a drop locker. The cabin shelving has removable fiddles and the hanging locker is louvered for extra ventilation. The dining table slides out from underneath the v-berth, above the two drawers, and is a particularly clever feature, having a hinged center which fits around the interior metal post and can be fully or partially extended.
True to Pacific Seacraft tradition, the hull and deck are solidly constructed from hand laminated fiberglass. The innermost layers are polyester and the outermost layers have utilized osmosis resisting vinylester resin since 1989. The deck is balsa cored with plywood core in high-load zones. The hull to deck joint is a double flange bedded in high tensile polyurethane adhesive compound and through-bolted with stainless bolts. The interior module is also of vinylester resin and is bonded to the hull with fiberglass mat and woven roving.
The interior fittings are white matte below counter height and teak above. Lead is used as ballast and is encapsulated in fiberglass. All through-hull fittings are solid bronze. Chainplates are through-fastened to the hull with stainless steel bolts and full backing plates.
Since 1989 the boat has had eight rectangular bronze port lights in place of the original round bronze ports.
Like all Crealock designs, the Dana 24 integrates a good deal of comfort in a well controlled and balanced hull. She's seakindly boat with a mellow motion through the water and her high ballast ratio (nearly 40%) no doubt helps her ultimate stability. The Crealock philosophy being comfort and stability translates to lower crew fatigue and faster, safer passages.
Light air performance is not her strength unless set up particularly well and skillfully sailed, don't expect too much boat speed, she is, after all, a heavier displacement boat on the grand scheme of things. In a breeze the Dana comes to life, she points well to windward and sails her best on a reach, while downwind her keel and hull form tracks well without a hint of squirming and with less roll than most.
One acknowledged weakness is her inability to hove-to, her high freeboard in her bow sections coupled with a big forefoot cutaway on her keel means her nose is easily knocked away.
Expect a top speed around 6.5 knots, and we've heard reports that well set up examples can top 120 mile days under during long passages. Not bad for a boat her size and displacement.
The condition of the 1992 Pacific Seacraft Dana 24 is above average. Owned for the last 16 years by the current owner, the vessel has been continuously serviced and maintained. No damage to the hull has been reported and only the teak on the starboard side has minimal damage. The engine is in good condition as stated by the owner.
-Canvas and zip attachment are new and are in good condition.
-Teak does need stain work.
-Sails are in average condition.
-The V-Berth mattress has been replaced by a custom mattress manufacturer.
-The fuel tank has been replaced by a custom designer.
-This boat is in turn key condition and ready to sail.
60-day Sea Tow membership* comes standard with your boat purchase!
All reasonable offers will be reviewed and presented to the seller.
All offers are contingent upon being fully satisfied with unit after personal inspection and/or professional inspection.
Check out this 1992 Pacific Seacraft DANA 24 in Hammond, Indiana! #PacificSeacraft #popyachts https://www.popyachts.com/sloop-sailboats-for-sale/pacific-seacraft-dana-24-in-hammond-indiana-114189
Click to tweet this message
We work closely with several marine lenders to offer you competitive rates and flexible financing options to get you approved and on the water quickly. Click the button below to view some of the lenders we work with.
Financing may not be available for this vessel, due either to its age or category. However, banks are giving marine loans, and we would love to get you started in a discussion about financing.
When prompted, enter stock number:
In order to see all photos, download a brochure, and more, please quickly create an account. It just takes a second and you will have unlimited access to view information for this listing and ALL others on the website.